Comments on: Downgrading iPhone from 1.1.2 to 1.1.1

By: Naveed

Naveed — Fri, 22 Feb 2008 17:39:44 +0000

I live in UAE where iphone has not been officially launched. The problem with ma iphone is that i’m unable to receive any call and whenever i use the dial pad after two charcters dial pad disappears. Previoulsy it was working fine but from last couple of days its creating problem. I have got 1.1.2 firmware. So can anybody help me out to fix this problem? will really appreciate..

By: alf

alf — Sat, 02 Feb 2008 17:28:36 +0000

if you have downgraded to 1.1.1 just tap jailbreakme.com in safari and it will automatically install the installer on your iphone. You will need to have wireless internet connection.

By: adrian

adrian — Sat, 26 Jan 2008 11:06:38 +0000

now i have an even bigger problem the phone says un able to make and recieve calls …. now what do i do ….

By: wohaha

wohaha — Wed, 23 Jan 2008 04:32:07 +0000

see here
http://www.gpsjammers.net/iphone-unlock

By: aDRIAN

aDRIAN — Wed, 16 Jan 2008 10:42:05 +0000

HEY EVERY ONE SOME ONE PLEASE EMAIL ME I JUST BOUGHT A NEW IPHONE AND I TRIED TO HACK IT WHEN I WAS ON A MAC USING IFUNTASTIC I DOWNGRADED IT TO 1.1.1 BUT NOW… WHEN I WENT TO UPGRADE IT TO 1.1.2 …ITS STUCK ON THE ACTIVATION SCREEN I WANT TO GET IT BACK TO THE HOME SCREEN WITH THE INSTALLER APP…. HOW CAN I PLUS IM RUNNING WINDOWS NOW

By: tokes

tokes — Thu, 10 Jan 2008 23:15:50 +0000

How do I know if my iphone has 1.1.1 or 1.1.2

By: Kunal

Kunal — Tue, 08 Jan 2008 09:19:59 +0000

Hey, is there any way of downgrading the 1.1.2 firmware to 1.1.1 so that all the third party apps can be installed? the iPhone is originally 1.1.2
are the instructions by ‘Jason Ja’ the instructions to do this and will this allow me to have a fully working iPhone which will still allow me to be able to install all the third party apps. Thanks please post

By: Javaman

Javaman — Mon, 07 Jan 2008 15:57:09 +0000

Does anybody know what Unknown Error 9 is? I’ve tried downgrading to 1.1.1 and the system will not now even allow me to restore to 1.1.2 quoting the above error message.

Any advice appreciated.

By: PJ

PJ — Mon, 07 Jan 2008 01:59:38 +0000

OK im totally lost now, if it is possible to make an iPhone with 1.1.2 pre-installed email me, also i dont want an itouch only, will the iPhone ever be hacked or will i have to use as an i tuoch?

Rogers signed contract with apple so it can work in canada. I want it to work with FIDO!!!!! NEED LOTS OF HELP EMAIL ME IF U NO WATS GOING ON
parteek_1@hotmail.com

By: nadjib

nadjib — Thu, 03 Jan 2008 18:36:34 +0000

hi thx for ur help Jason but we need help how to unlock iPhone 1.1.2 with any methods (downgrading to 1.1.1 then jailbreak…) and tell us how to do please. I bought a v.1.1.2 at apple, any help email me at nadjibka@hotmail.com. Thx alot!

By: Jason Ja

Jason Ja — Thu, 03 Jan 2008 09:07:33 +0000

hey guys I see everyone has some concern about what I have posted… I will post the proceedure later today. For 1.1.1 to upgrade to 1.1.2

By: ratana

ratana — Thu, 03 Jan 2008 07:13:33 +0000

hi awesome sauce. i finally found the independence software. i download the file, its in the extension .dmg. how can i open and run this file? i’m using pc not mac by the way.

By: ratana

ratana — Thu, 03 Jan 2008 06:42:08 +0000

this message for awesome sauce. when you say go to Help iNdependance Help. what exactly do u mean? is it a website? because i can’t find it. if it is a web site can you give me the full address? thanks.

By: chancho

chancho — Thu, 27 Dec 2007 23:49:45 +0000

Guys,

I have checked a few different ways of unlocking the latest iPhone 1.1.2 OTB and there is nothing that works properly. Although I heard there is a Chinese group that has apparently unlock this phone and they say that they will release this soon, however I also heard that Apple will be bringing out new firmware V1.1.3 (without base loader)which will be nearly impossible to hack.
Unless anyone can show me otherwise then this comment stands firm.
Beware of all these rip offs out there, because that’s all they are and oh the “Turbo Sim” does not unlock the phone it just tricks the phone, but has some side effects.

By: Shane

Shane — Wed, 26 Dec 2007 13:09:58 +0000

hi any folks needing help downgrading from baseband 4.02.13_G or 4.01.13_G or unlocking 1.1.1 or 1.1.2 email or add me at shanec2k3@hotmail.com

By: Huriel

Huriel — Tue, 25 Dec 2007 16:15:35 +0000

I did all the restore steps, but when i get the error(1015) i can not gor futter, the only option i have is to restore it to version 1.1.2
can someone help me
jhuriel1985@hotmail.com

By: Adam

Adam — Tue, 25 Dec 2007 08:34:51 +0000

So i just bought a iphone that has version 1.1.2 out of box. I am new to hacking these and after reading these posts am still unsure of some things. I understand that it is necessary to downgrade the phone to version 1.1.1 in order to continue on but once you unlock and activate it, will you be able to place another sim card into the phone that is on a plan and use the phone service. I tend to read that the phone will be unlocked and activated, but it seems like you cannot use the calling feature. Can someone please clarify whether you will be able to use the call feature if you place a new, activated sim card from another company in…(i.e. rogers). Also, what is the equivalent program to iNdependance for a regular pc(windows based). Thanks.

By: Awesome Sauce

Awesome Sauce — Mon, 24 Dec 2007 19:58:08 +0000

OMG!!! The only thing you need to unlock any iPhone version is iNdependance (latest version) Go to Help-iNdependance Help. Click “Overview of the interface and how to use it” Or the second option, if you are physically incapable of reading. Scroll down to the very bottom. You will see “Usage By Phone Firmware Version” On the very, very bottom, you will see two options. One is if you have version 1.0.2 or lower, one is if you are using 1.1.1 or higher. These are very in-depth tutorials on how to unlock it. Hell, this can even unlock phones with the new bootloader that just started shipping from apple. In fact, I’m surprised I’m the first one who has found this out on the internet. Everyone else is too lazy to read the help instructions. Everywhere I look “You can’t unlock with the new bootloader. Yeah right! Whatever. Hope this helps those 12-year-olds that get iPhones, and their parents switch service providers, so they look everywhere for hacks to unlock, but cannot find an unlock with new bootloader. (P.S. – I AM NOT A 12-YEAR-OLD!!! I AM ALSO NOT SMARTER THAN MY COMPUTER TEACHER, AND AM NOT CALLED WHENEVER MY ENGLISH TEACHER’S COMPUTER IS NOT WORKING!!!!!)

By: chancho

chancho — Mon, 24 Dec 2007 12:28:41 +0000

I agree this shit is not ezi.
“Jason Ja” gives the instructions, but there is some detail missing.
I have a brand new iphone recently purchased, so I assume it would have v1.1.2 firmware, would I still need 1.1.2 firmware or would I have to downgrade to 1.1.1 then upgrade to 1.1.2?
and where do you get this software from “1.1.2 Jailbreak”

By: unknow

unknow — Sun, 23 Dec 2007 18:30:39 +0000

Hey guys i just got the ipbone two days ago and i tried to

downgrade it from 112 and it’s not working for me
i tried two method already. I think it may be the
backup frameware i got>1.1.1 .. dose any one leave in new york city .. this shit ain’t ez as it should be.
too much miss communication. if any one have it working
and would like to give me a hand in person just reply to this with your email. thx