Comments on: iPhone v1.1.4 jailbreak, activation and SIM unlock guide – Mac AND Windows [Update]

By: kt

kt — Sun, 08 Nov 2009 21:14:01 +0000

so im going to get an i phone and jailbreak if for my tmobile service. is there anything extra i have to do with that, like pay for the internet on it?

By: Victoria

Victoria — Sat, 22 Aug 2009 00:28:51 +0000

for some reason it doesn`t recognize my ipod .
it says ”no device connected” ,
help .
i don`t want to try ziphone ,
i have a mac desktop and everyones says iLibertyX works better than the ziphone .

By: fora

fora — Thu, 11 Jun 2009 06:14:29 +0000

thanks for really good guide, very useful

By: AYIE

AYIE — Wed, 27 May 2009 23:15:24 +0000

how can i jailbreak and use iphone here in the phil. I have a 1.1.4(4A102) version. help i cannot put any carrier provider here.

By: Shaggy

Shaggy — Mon, 11 May 2009 17:14:45 +0000

i jailbroke my iphone but the Wi-Fi isn’t working.please help.

By: steve

steve — Tue, 07 Apr 2009 18:21:38 +0000

I quick pwn my iphone 2g every thing work good but my utube and network don’t work

By: Zephy

Zephy — Tue, 10 Mar 2009 19:29:10 +0000

when i am trying to unlock the iphone tthrough zihone iliberty it gets stuck on recovery section

By: Deji Doherty

Deji Doherty — Sun, 01 Mar 2009 07:33:56 +0000

My iphone hung up for several days, I left the battery to run down and then I charged it and switch it ON again, it will only return to same position, so I did a restore with my itune which had ver 2.2, after the restore, I couldn’t use my phone because of my region. Can someone help me with a way forward.

thank you

By: mk

mk — Wed, 11 Feb 2009 17:29:21 +0000

im totally new to this…..
i’ve read countless stuff…..and now im all confused………..
where do i start?

also……whats the difference between jailbreak and unlocking?

sorry for being clueless, but plz help!

By: daljit parmar

daljit parmar — Sun, 25 Jan 2009 09:26:25 +0000

i have iphone8gb with the version 1.1.4(4a102) ..i was trying to connect
itunes v. 8.0.2.20. but itunes dosn’t show device. is it thr version mismatch problem
betweeen iphone version an itunes version. if yes .. please help how can i solve it ang connect my iphone to itunes.
thanks
daljit parmar

By: Alex

Alex — Sat, 17 Jan 2009 15:52:18 +0000

Hey, I just got my self an iPhone 2G that was bought in London, worked fine with my sim card, the phone was not sim locked. But now when I tried to download the new uppdates 2.2 for my phone from iTunes, the phone was restored and I cant activate it with my sim card. I tried to use iLiberty+ but with no results, it just wont work
Help me please

By: Carlos

Carlos — Tue, 13 Jan 2009 22:56:45 +0000

I have a 2G iPhone unlocked with version 2.1 on it. I tried to add the facebook app and it says “This app is not compatible with this iPhone. Help!!

By: lm

lm — Sat, 27 Dec 2008 15:05:07 +0000

i have just used quickpwn on my iphone which didnt have any of the same instructions as above..is that normal?
I also now have no signal and no wifi.. how do i get it back
Please help me!!

By: Ron

Ron — Thu, 18 Dec 2008 18:49:41 +0000

I got unlock iPhone but the problem is everytime I go to the place has no signal my network got lost or no service, i need to bring it back
to the store to fix it I’m tired doing that, is there any one can help me pls,. Thanks

By: Will Park

Will Park — Sun, 07 Dec 2008 22:29:49 +0000

Beano:
You can use WiFi hotspots for free. There is no charge from AT&T to use a free wifi network.

Rolfe:
If you want to preserve your jailbreak, and potentially an unlockable iPhone 3G baseband firmware, you’ll want to wait for the iPhone Dev Team to jailbreak subsequent iPhone updates before performing a software update.

Subsequent software updates should be performed through PwnageTool, just to be safe.

By: Rolfe S

Rolfe S — Sun, 07 Dec 2008 01:43:46 +0000

Hi – I have just loaded this up! Thanks!! Its great.

Question – what happens when the iPhone says that there is a software upgrade? Do you ignore it or can you upgrade the firmware? (excuse my ignorance – your help appreciated!)

Cheers

By: Beano

Beano — Sat, 06 Dec 2008 19:22:31 +0000

I jailbroke my friends iPhone unlocking it and activated it quickpwn 2.1,using my sim card from att&t and it worked great! so I rejailbroke (to use his t-mobile sim card) using quickpan 2.1 but ran into errors read to use Quikpwn2.2, so I used quickpan 2.2. Quickpwn 2.2 allowed me to reset back to v2.1 but when I put in his sim card (T-mobile with adapter) iphone comes up but no service and can’t make any calls or internet (wifi works!).

My question is With the sim card removed, I can still bring up the iphone (select no sim card) and still play with appts. I have a wireless network at home and the iphone sees it as a WIFI available connection. I DO NOT have internet capabilities on my cell phone package, would I be able to use wifi for free anywhere or through my internet wireless or would It cost me a fee by my internet provider or cell phone provide (Both are AT&T)?

thanks

NOTE: called at&t they said I have to have some type of internet package on phone to use either internet wireless at home or wifi anywhere or I would be charged? any comments!!

By: jailbreak iphone

jailbreak iphone — Thu, 04 Dec 2008 21:30:18 +0000

I have just done my iphone i was a little bit scared to mess about with it at first but it really is simple to do and now i can do so much more with my iphone great stuff thanks…

By: iphone sim unlock

iphone sim unlock — Fri, 07 Nov 2008 06:29:20 +0000

It works without any problems ! Thank you so much !

By: Janice

Janice — Tue, 04 Nov 2008 15:23:27 +0000

Does the “do-it-yourself Plug & Play sim card ” for unlocking iPhone 3G to work for any network,
any carrier, any SIM card can help you???
check here:
http://www.magicsim.com/en/iphone_3g_unlock.asp?new_id=47