Comments on: iPhone and iPhone 3G jailbreak and unlock guide – Pwnage Tool 2.2 jailbreaks and unlocks iPhone 2.2 OS!

By: jhon

jhon — Tue, 08 Sep 2009 07:49:41 +0000

hi… i dont know what happend to my iphone 16gb.. when i turn it on…there only comes pine apple logo….it stops there…nothing else appear…can any one help me plz…what to do..??

By: Brian

Brian — Fri, 12 Jun 2009 20:13:15 +0000

I have unlocked/jailboken my IPhone entered my Sim Card and Unlock Chip. The phone connects to my service provider (vodaphone) for about 30 secs then looses the connection and gives a message of either No Service or No Sim Card installed. Is the unlock chip faulty or is the unlock/jailbreak incomplete. I have all the apps and wireless connection (conected through home Broadband) working fine apart from the phone??

By: Nabeel

Nabeel — Thu, 11 Jun 2009 10:29:35 +0000

My iPhone 3G is not working after i have updated it from itune. it’s keep on giving me message like “update from iTune” and neither it is copying and deletign anything on the memory. Help please………urgent

By: Where can i purchase an iphone

Where can i purchase an iphone — Mon, 25 May 2009 22:02:57 +0000

Followed these instructions in extreme detail just to see if they worked. Everything worked fine. Just a rather lengthy procedure, that’s all.

By: gunit

gunit — Mon, 25 May 2009 16:00:35 +0000

hello pros ,

i have a iphone 3G from AT&T. i JB with 2.2.1 and install the quickpwn 2.25. then i realize that there is no signal. the carrier was AT&T.

then i read some comand regarding JB which says that yellowsnow 9.8 cannot work on 2.2.1 firmare.

then i down grade to 2.2 firm ware, and JB. I install yellowsnow9.8.
yet i still do not have any signal. i tried to switch off and on, take out SIM card whatever, it just does not work.
now i am running on 2.2(5G77) version with 2.30.03 modem firmware.
Pleassssssssse,,,,,some guru …
get me some solution,,,,,it takes your a second and save my IPhone 3G’s life.

deeply appriciate..
—-GUNIT

By: Tavo

Tavo — Fri, 22 May 2009 12:28:19 +0000

I have an iPhone 3g 2.2.1 and a 13-inch macbook,
did exactly as detailed here on this tutorial
and everything worked great
thanks for the tutorial

By: Augusto

Augusto — Tue, 19 May 2009 09:13:43 +0000

My question refers to:
[Update 1]
….
New MacBook and MacBook Pros are reportedly blocking first-time jailbreak attempts, but should work fine with already-jailbroken iPhones.

I have a MacBook Pro that I purchased in april 2008 (details are: Model Name: MacBook Pro, Model Identifier: MacBookPro4,1, Processor Name: Intel Core 2 Duo, Processor Speed: 2.4 GHz) and my I-phone (3G with 2.2 firmware) has never been jailbroken. With these conditions, does the procedure described in
http://www.intomobile.com/2008/11/23/iphone-dev-team-does-it-again-pwnage-tool-22-jailbreaks-iphone-22-os.html
work ?

By: L3D

L3D — Thu, 07 May 2009 00:08:07 +0000

I jailbroke my 2G with no problem. Now I want to Jailbreak my 3G. My 3G has firmware 02.30.03 , 2.2.1 (5H11). Will I be able to jailbreak my IPhone 3G?

By: Austin

Austin — Sat, 18 Apr 2009 06:21:34 +0000

I have an Iphone 2g and have dont all the step corectly I upgraded my pwnage tools to the latest and I am using a 2.2.15h11. once I create the new custome I follow the steps to put it in Dfu mode once in the mode there is an error and my mac wont recognize the phone. So I did it by using restore mode and it all seems like it is going to work until it suddenly comes up with anyone error. I cant understand what is wrong I have done these directions 3 times and I tried using the older guide as well but no luck. Does anyone have a clue how to jail break my phone?

By: moch.rozim

moch.rozim — Thu, 16 Apr 2009 15:22:20 +0000

how about the newest version?

By: deezee

deezee — Thu, 16 Apr 2009 06:36:31 +0000

thanks bro i un- installed kate and got my dialer pad back u saved me lol thx

By: baddy

baddy — Tue, 14 Apr 2009 20:38:44 +0000

i resently jailbroke my iphone 3g , and working fine

By: Unlock iPhone 3G

Unlock iPhone 3G — Sat, 11 Apr 2009 19:32:54 +0000

I’ve tried using this guide to unlock my iPhone 3G but now I can’t get any signal on T-Mobile, anyone else had this problem or know how to fix?

By: jenna

jenna — Tue, 07 Apr 2009 14:21:04 +0000

Thank you so much. I have been unable to use my iphone since christmas!! This did it!!

By: maria

maria — Sun, 05 Apr 2009 00:58:04 +0000

will this delete my apps?

By: frjotabo

frjotabo — Thu, 02 Apr 2009 22:21:46 +0000

few questions…DFU mode was successful using pwnage tool…so, i opened itunes as instructed…pressed option+restore…clicked that custom firmware file created by pwnage tool but there was an error 21 after extracting that software. what do you think is the problem? should i restore it again in itunes? i’m using OS 10.5.6…02.30.03 something…what should i do more?

By: frjotabo

frjotabo — Thu, 02 Apr 2009 22:15:38 +0000

we have the same problem…got a 2.30.03…something…

By: jojo

jojo — Thu, 02 Apr 2009 22:07:13 +0000

I have the same problems with Murray and QR..i used pwnage tool…DFU mode was successful…went to itunes…pressed option+restore…but the custom bundle firmware can’t be opened…it was error 21…iphone could not be restored…i don’t know the problem…i’m using OS 10.5.6 does it have something to do with that? please let me know…it’s an exciting discovery..hope i won’t run out of patience…HELP!

By: Mark

Mark — Thu, 19 Mar 2009 21:24:48 +0000

I was able to jailbreak a 3G iPhone with 2.2.1 using the new aluminum MacBook with no modifications. I couldn’t enter DFU mode with the iPhone connected directly to the MacBook which is the problem that most people are experiencing, but it works perfectly when connected through a cheap usb hub that I had laying around.

By: confused...

confused... — Fri, 13 Mar 2009 22:13:50 +0000

So I tried jailbreaking my iPhone 3G. It says it’s been successfully pwned, BUT there is no evidence it has transferred to my phone…I have no new logos or apps showing up…